دستگاه تراش سی ان سی CNC BL-S32/32T
دستگاه تراش سی ان سی CNC BL-S32/32T
S PRECISE series
TAIWAN technology
5’’/6’’ collet/chuck
Gang tool/8T tool turret
Without tailstock
S32 mount gang tool device, S32T mount 8 station HYDRAULIC-SERVO tool turret.
Super compact structure(similar as JAPAN machine), big inside space, modern appearance
Adopt TAIWAN technology, designed by TAIWAN engineer, most parts adopt GERMANY/JAPAN/TAIWAN brand.
Adopt 30°mono-block slant bed design, high rigidity, good machining flexibility,easy for chip conveying
Adopt modularization design, has strong extended function, easy for various especial configuration choice, such as
tool setter, robot etc
Adopt HT300 resin sand cast iron, after aging treatment and FEA analysis, small distortion, good torsional strength,
good heat stability.
Frame adopt oil-coolant separation design, adopt independent coolant tank
Adopt high precision integral spindle unit, spindle motor adopt high performance servo motor, big output torque,
high speed,wide adjustment range
Adopt high precision pre-stretched ball screw(double-nuts), coupled with feeding motor directly by linkager, no gap,
high transmission rigidity, can realize μ class precise turning.
Adopt high precision wide linear guideway, high rigidity and long using lifespan, fast moving speed, good accuracy
holding, suitable for precise machining
SIEMENS 808D ADVANCED CNC controller
Hydraulic collet(S32)/hydraulic chuck(S32T)
Gang tool(S32)/8 station SERVO tool turret(S32T)
SIEMENS 828D/FANUC 0i TF CNC controller
Chip conveyor
دستگاه تراش سی ان سی CNC BL-S32/32T
مشخصات فنی دستگاه تراش سی ان سی CNC BL-S32/32T
Item | Specification | Unit | BL-S32 | BL-S32T |
Capacity | Chuck size | / | 5’’ collet | 5’’/6’’* chuck |
Max. swing dia. over bed | mm | Φ360 | ||
Max. swing dia. over slide | mm | Φ90 | Φ160 | |
Max. turning length | mm | 260 | 180 | |
Max. turning dia. | mm | Φ85 | Φ240 | |
Spindle | Spindle bore | mm | Φ46 | |
Spindle end type | / | A2-4 | ||
Spindle speed | rpm | 5000 | ||
Max. bar through dia. | mm | Φ35 | Φ32 | |
Spindle motor power | kw | 3.7/5.5* | ||
X/Z axes | X axes travel | mm | 300 | 120+30 |
Z axes travel | mm | 300 | 300 | |
X/Z axes rapid moving speed | m/min | 28/28 | ||
Tool post | Tool turret type | / | Gang tool | Hydraulic-Servo tool turret |
Tool qty | / | 5 | 8 | |
Vicinal tool changing time | s | / | 0.4 | |
Farthest tool changing time | s | / | 0.57 | |
Toolshank size | mm | 16×16(20×20), Φ25 | 20×20, Φ25 | |
Tailstock | Tailstock quill taper | / | None | |
Accuracy | Ex-circle finish turning accuracy | / | IT6 | |
Finish turning roughness | mm | Ra0.4~1.6 | ||
Finish turning roundness | mm | ≤0.003 | ||
Positioning accuracy(X/Z) | mm | 0.005/0.008 | ||
Repeat positioning accuracy(X/Z) | mm | 0.002/0.004 | ||
Others | Coolant motor | w | 180 | |
Coolant liquid flux | m³/h | 3 | ||
Overall size | mm | 1700×1360×1600 | ||
N.W. | kg | 1500 | 1600 |
لیست قطعات دستگاه تراش سی ان سی CNC BL-S32/32T
Item | Brand |
CNC controller | GERMANY-SIEMENS |
X,Z axes driver&motor | GERMANY-SIEMENS |
Spindle driver&motor | CHINA top-CTB |
Spindle unit | TAIWAN-VOLIS/KENTURN |
Tool turret | GERMANY-SAUTER/INDIA-PRAGATI |
Ball screw | TAIWAN-PMI/HIWIN C3 class |
Ball screw bearing | JAPAN-NSK/NTN |
Linear guideway | TAIWAN PMI/HIWIN |
Lubrication system | TAIWAN-ISHAN |
Rotary oil cylinder&chuck | TAIWAN-AUTOGRIP |
Hydraulic parts | TAIWAN/JAPAN |
Coolant pump | Joint-venture |
MPG | USA-HEDSS |
Tri-color indication lamp | KOREA-QLIGHT |
Isolation transformer | CHINA top-CHINT/JIUKO |
Circuit breaker | FRANCE-SCHNEIDER |
AC contactor | FRANCE-SCHNEIDER |
Relay | JAPAN-OMRON |
DC switch power supply | TAIWAN-MEANWELL |
Terminal block | GERMANY-WEIDMULLER |
Synchronous belt | USA-GATES |
Synchronous belt wheel | TAIWAN-PTP |
Nuts | TAIWAN-YINSH |
Shaft coulping | GERMANY-KTR/R+W |
Scrapping plate
Extensible cover |
TAIWAN-WANHE |
Chip conveyor | TAIWAN-WANHE |
Coolant pipe | TAIWAN-WEIDING |
Collet, Gang tool holder | Own-made |